Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
)
(SrAl
TaO)
with 
Ito, Takashi; Higemoto, Wataru; Koda, Akihiro*; Nakamura, Jumpei*; Shimomura, Koichiro*
Interactions (Internet), 245(1), p.25_1 - 25_7, 2024/12
Yuan, X.*; Hu, Q. H.*; Fang, X.*; Wang, Q. M.*; Ma, Y.*; Tachi, Yukio
Sedimentary Geology, 465, p.106633_1 - 106633_14, 2024/05
Irisawa, Eriko; Kato, Chiaki
Journal of Nuclear Materials, 591, p.154914_1 - 154914_10, 2024/04
Times Cited Count：0 Percentile：0.08(Materials Science, Multidisciplinary)The amount of corrosion of austenitic stainless-steel R-SUS304ULC was evaluated considering the changes in solution composition and boiling during actual concentration operations. Austenitic stainless-steel R-SUS304ULC is the structural material of the highly radioactive liquid waste concentrator in Japanese spent fuel reprocessing plant, which treats highly corrosive nitric acid solutions during enrichment operations. The study results show that it is necessary to focus on nitric acid concentrations, oxidizing metal ion concentrations, and decompression boiling as factors that accelerate the corrosion rate of stainless steel because of cathodic reaction activation.
Ito, Takashi; Kadono, Ryosuke*
Journal of the Physical Society of Japan, 93(4), p.044602_1 - 044602_7, 2024/04
Times Cited Count：0Morimoto, Kyoichi; Ono, Takahiro; Kakutani, Satomi; Yoshida, Moeka; Suzuki, Soichiro
Journal of Robotics and Mechatronics, 36(1), p.125 - 133, 2024/02
The Naraha Center for Remote Control Technology Development was established for the purpose of developing and verifying remote control equipment for promoting the decommissioning of the Fukushima Daiichi Nuclear Power Station and the external use of this center was started in 2016. The mission of this center is to contribute to the decommissioning of the Fukushima Daiichi Nuclear Power Station and for the reconstruction of Fukushima Prefecture. In this review, we describe the equipment related to the full-scale mock-up test, the component test for a remote-control device and the virtual reality system in this center. In addition, the case examples for usage of these equipment are introduced.
Nakamura, Keita; Hanari, Toshihide; Matsumoto, Taku; Kawabata, Kuniaki; Yashiro, Hiroshi*
Journal of Robotics and Mechatronics, 36(1), p.115 - 124, 2024/02
Hata, Koji*; Niunoya, Sumio*; Aoyagi, Kazuhei; Miyara, Nobukatsu*
Journal of Rock Mechanics and Geotechnical Engineering, 16(2), p.365 - 378, 2024/02
Excavation of underground caverns, such as mountain tunnels and energy-storage caverns, may cause the damages to the surrounding rock as a result of the stress redistribution. In this influenced zone, new cracks and discontinuities are created or propagate in the rock mass. Therefore, it is effective to measure and evaluate the acoustic emission (AE) events generated by the rocks, which is a small elastic vibration, and permeability change. The authors have developed a long-term measurement device that incorporates an optical AE (O-AE) sensor, an optical pore pressure sensor, and an optical temperature sensor in a single multi-optical measurement probe (MOP). Japan Atomic Energy Agency has been conducting R&D activities to enhance the reliability of high-level radioactive waste (HLW) deep geological disposal technology. In a high-level radioactive disposal project, one of the challenges is the development of methods for long-term monitoring of rock mass behavior. Therefore, in January 2014, the long-term measurements of the hydro-mechanical behavior of the rock mass were launched using the developed MOP in the vicinity of 350 m below the surface at the Horonobe Underground Research Center. The measurement results show that AEs occur frequently up to 1.5 m from the wall during excavation. In addition, hydraulic conductivity increased by 2 to 4 orders of magnitude. Elastoplastic analysis revealed that the hydraulic behavior of the rock mass affected the pore pressure fluctuations and caused micro-fractures. Based on this, a conceptual model is developed to represent the excavation damaged zone (EDZ), which contributes to the safe geological disposal of radioactive waste.
Nagata, Hiroshi; Omori, Takazumi; Maeda, Eita; Otsuka, Kaoru; Nakano, Hiroko; Hanakawa, Hiroki; Ide, Hiroshi
JAEA-Review 2023-033, 40 Pages, 2024/01
JAEA-Review-2023-033.pdf:1.39MB
Japan Materials Testing Reactor (JMTR) was decided as a one of decommission facilities in April 2017. In order to submit the decommissioning plan to the Nuclear Regulation Authority, the type of accident assumed in the first stage of the decommissioning plan was selected, and the public exposure dose was evaluated. A fuel handling accident and a fire accident during storage of waste were selected as assumed accidents in the first stage of the decommissioning plan. An evaluation of the public exposure dose from the radioactive materials released into the atmosphere due to these accidents was estimated to be a maximum of 0.019 mSv (due to a fire accident during storage of waste). This estimated value was found to be sufficiently smaller than the judging criteria (5 mSv), and not to pose a significant risk of radiation exposure to the general public.
Collaborative Laboratories for Advanced Decommissioning Science; National Institute for Materials Science*
JAEA-Review 2023-031, 101 Pages, 2024/01
JAEA-Review-2023-031.pdf:24.47MB
The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2022. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station (1F), Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2020, this report summarizes the research results of the "Development of genetic and electrochemical diagnosis and inhibition technologies for invisible corrosion caused by microorganisms" conducted from FY2020 to FY2022. The present study aims to develop innovative diagnostic techniques such as accelerated test specimens and on-site genetic testing for microbially induced and accelerated corrosion of metallic materials (microbially influenced corrosion, MIC), and to identify the conditions that promote MIC at 1F for proposing methods to prevent MIC through water quality and environmental control.
Horii, Yuta; Hirooka, Shun; Uno, Hiroki*; Ogasawara, Masahiro*; Tamura, Tetsuya*; Yamada, Tadahisa*; Furusawa, Naoya*; Murakami, Tatsutoshi; Kato, Masato
Journal of Nuclear Materials, 588, p.154799_1 - 154799_20, 2024/01
Times Cited Count：1 Percentile：68.31(Materials Science, Multidisciplinary)The thermal conductivities of near-stoichiometric (U,Pu,Am)O
doped with NdO
/SmO, which is major fission product (FP) generated by a uranium-plutonium mixed oxides (MOX) fuel irradiation, as simulated fission products are evaluated at 1073-1673 K. The thermal conductivities are calculated from the thermal diffusivities that are measured using the laser flash method. To evaluate the thermal conductivity from a homogeneity viewpoint of Nd/Sm cations in MOX, the specimens with different homogeneity of Nd/Sm are prepared using two kinds of powder made by ball-mill and fusion methods. A homogeneous Nd/Sm distribution decreases the thermal conductivity of MOX with increasing Nd/Sm content, whereas heterogeneous Nd/Sm has no influence. The effect of Nd/Sm on the thermal conductivity is studied using the classical phonon transport model (A+BT)
. The dependences of the coefficients A and B on the Nd/Sm content (C
and C
, respectively) are evaluated as: A(mK/W)=1.70 
10
+ 0.93C + 1.20C, B(m/W)=2.39 10
.
Hirota, Noriaki; Nakano, Hiroko; Fujita, Yoshitaka; Takeuchi, Tomoaki; Tsuchiya, Kunihiko; Demura, Masahiko*; Kobayashi, Yoshinao*
The IV International Scientific Forum "Nuclear Science and Technologies"; AIP Conference Proceedings 3020, p.030007_1 - 030007_6, 2024/01
Dynamic strain aging (DSA) and intergranular stress corrosion cracking (intragranular SCC) occur in high temperature pressurized water simulating a boiling water reactor environment due to changes in dissolved oxygen (DO) content, respectively. In order to clearly understand the difference between these phenomena, the mechanism of their occurrence was summarized. As a result, it was found that DSA due to intragranular cracking occurred in SUS304 stainless steel at low DO 
1 ppb, while DSA was suppressed at DO 100 to 8500 ppb due to the formation of oxide films on the surface. On the other hand, when DO was increased to 20000 ppb, the film was peeled from the matrix, O element diffused to the grain boundary of the matrix, resulting in intergranular SCC. These results are indicated that the optimum DO concentration must be adjusted to suppress crack initiation due to DSA and intergranular SCC.
Riyana, E. S.; Okumura, Keisuke; Sakamoto, Masahiro; Matsumura, Taichi; Terashima, Kenichi; Kanno, Ikuo
Journal of Nuclear Science and Technology, 8 Pages, 2024/00
Times Cited Count：0 Percentile：0.08(Nuclear Science & Technology)
McGrady, J.; Kumagai, Yuta; Watanabe, Masayuki; Kirishima, Akira*; Akiyama, Daisuke*; Kimuro, Shingo; Ishidera, Takamitsu
Journal of Nuclear Science and Technology, 60(12), p.1586 - 1594, 2023/12
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)Ito, Takashi; Higemoto, Wataru; Shimomura, Koichiro*
Physical Review B, 108(22), p.224301_1 - 224301_11, 2023/12
Times Cited Count：1 Percentile：0(Materials Science, Multidisciplinary)Otani, Kyohei; Kato, Chiaki; Igarashi, Takahiro
Corrosion, 79(11), p.1277 - 1286, 2023/11
Tuya, D.; Nagaya, Yasunobu
Journal of Nuclear Engineering (Internet), 4(4), p.691 - 710, 2023/11
The Monte Carlo method is used to accurately estimate various quantities such as k-eigenvalue and integral neutron flux. However, when a distribution of a quantity is desired, the Monte Carlo method does not typically provide continuous distribution. Recently, the functional expansion tally and kernel density estimation methods have been developed to provide continuous distribution. In this paper, we propose a method to estimate a continuous distribution of a quantity using artificial neural network (ANN) model with Monte Carlo-based training data. As a proof of concept, a continuous distribution of iterated fission probability (IFP) is estimated by ANN models in two systems. The IFP distributions by the ANN models were compared with the Monte Carlo-based data and the adjoint angular neutron fluxes by the PARTISN code. The comparisons showed varying degrees of agreement or discrepancy; however, it was observed that the ANN models learned the general trend of the IFP distributions.
Hirooka, Shun; Horii, Yuta; Sunaoshi, Takeo*; Uno, Hiroki*; Yamada, Tadahisa*; Vauchy, R.; Hayashizaki, Kohei; Nakamichi, Shinya; Murakami, Tatsutoshi; Kato, Masato
Journal of Nuclear Science and Technology, 60(11), p.1313 - 1323, 2023/11
Times Cited Count：3 Percentile：94.27(Nuclear Science & Technology)Additive MOX pellets are fabricated by a conventional dry powder metallurgy method. NdO and SmO are chosen as the additive materials to simulate the corresponding soluble fission products dispersed in MOX. Shrinkage curves of the MOX pellets are obtained by dilatometry, which reveal that the sintering temperature is shifted toward a value higher than that of the respective regular MOX. The additives, however, promote grain growth and densification, which can be explained by the effect of oxidized uranium cations covering to a pentavalent state. Ceramography reveals large agglomerates after sintering, and Electron Probe Micro-Analysis confirms that inhomogeneous elemental distribution, whereas XRD reveals a single face-centered cubic phase. Finally, by grinding and re-sintering the specimens, the cation distribution homogeneity is significantly improved, which can simulate spent nuclear fuels with soluble fission products.
Nagai, Haruyasu; Furuta, Yoshihiro*; Nakayama, Hiromasa; Satoh, Daiki
Journal of Nuclear Science and Technology, 60(11), p.1345 - 1360, 2023/11
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)A novel monitoring method for the quantitative visualization of 3D distribution of a radioactive plume and source term estimation of released radionuclides is proposed and its feasibility is demonstrated by preliminary test. The proposed method is the combination of gamma-ray imaging spectroscopy with the Electron Tracking Compton Camera (ETCC) and real-time high-resolution atmospheric dispersion simulation based on 3D wind observation with Doppler lidar. The 3D distribution of a specific radionuclide in a target radioactive plume is inversely reconstructed from line gamma-ray images from each radionuclide by several ETCCs located around the target by harmonizing with the air concentration distribution pattern of the plume predicted by real-time atmospheric dispersion simulation. A prototype of the analysis method was developed, showing a sufficient performance in several test cases using hypothetical data generated by numerical simulations of atmospheric dispersion and radiation transport.
Maruyama, Shuhei; Endo, Tomohiro*; Yamamoto, Akio*
Journal of Nuclear Science and Technology, 60(11), p.1372 - 1385, 2023/11
Times Cited Count：1 Percentile：68.31(Nuclear Science & Technology)Soler, J. M.*; Kek
linen, P.*; Pulkkanen, V.-M.*; Moreno, L.*; Iraola, A.*; Trinchero, P.*; Hokr, M.*; 
ha, J.*; Havlov
, V.*; Trpko
ov, D.*; et al.
Nuclear Technology, 209(11), p.1765 - 1784, 2023/11
Times Cited Count：2 Percentile：87.3(Nuclear Science & Technology)